Cart 0

Opti-Rite® Dry Erase Wallpaper, Magnetic, White Gloss, 48" wide

    • $343.00
      Unit price per 
    • Save $51.45
    • The Opti-Rite® magnetic dry erase grid pattern wall covering has a moderate gloss finish and measures 48" wide and is available in custom roll lengths up to 75' long. The light grid pattern or ghost grid is approximately 2" x 2".
    • The Opti-Rite magnetic dry erase grid pattern wall covering is not recommended for full-wall installations, but it is perfect for resurfacing existing chalkboards or whiteboards as well as any clean, smooth surface. Painted walls should be completely cured and non-porous before installation.
    • Our wall covering adhesive which is sold separately, is used to apply the Opti-Rite® magnetic dry erase wall covering. The installer should be familiar with installing a heavy vinyl type wall covering.
    • The product is magnetic receptive meaning that it will hold magnetic accessories. High powered magnets are recommended.
    • This magnetic dry erase wall covering is flexible so it can be rolled up and shipped in a heavy duty UPS shipping tube in rolls up to 75'.
    Shipping calculated at checkout.

    Enter a cut size (in Feet) and a quantity to add custom sizes to your order. Click the + icon to add multiple cuts. Custom cut sizes can only be cut lengthwise rounded to the nearest whole foot.

    Don't forget the adhesive & primer!
    Opti-Rite® magnetic dry erase wall covering with a grid pattern. This is a moderate gloss, dry erase wall covering that is 48" wide and comes in rolls up to 75' long. It is available in custom cut lengths as well. There is a ghost or light grid pattern of approximately 2" x 2". This magnetic dry erase wall covering is flexible so it can be rolled up and shipped in a heavy duty UPS shipping tube in rolls up to 75'. Opti-Rite® Magnetic Grid is magnetic receptive meaning that it will hold light magnetic accessories. It is not a magnet itself and it will not stick to metal surfaces on its own. You install Opti-Rite® Magnetic Grid using an adhesive which is sold separately and similar to wall paper adhesive. High powered magnets are recommended. Your installer should be familiar with installing a heavy vinyl type wall covering. You can resurface existing chalkboards or whiteboards or apply directly onto a smooth, non-porous, painted wall. You should completely clean the materials after installation before use. This material is Not recommended for full-wall installations. Please note that custom cut rolls of Opti-Rite® are not returnable.
    finish gloss
    description Magnetic Receptive Dry Erase Wallpaper
    application requires adhesive
    color grid print
    backing fabric
    roll width 48"
    full roll width 75'

    Opti-Rite® Fabric or Scrim Backed Installation

    Tools Required:

    • Acrylic Primer
    • Paint roller and tray
    • Painter’s tape
    • Measuring tape
    • Level
    • Scissors
    • Heavy Duty Clay-based Strippable Adhesive
    • Sand paper
    • X-Acto knife and blade replacements
    • Smoothing tool or squeegee
    • Soft cloth

    Included Parts:

    Opti-Rite® Material with Fabric or Scrim Backing

    Important Tips:

    • For best results, White Acrylic Primer is recommended on clean, smooth, dry, structurally sound surfaces to prep the wall for a proper bond and to help cover up extreme light and dark areas of drywall.
    • If future stripability is desired, apply a high quality acrylic wall covering primer and a heavy duty clay based strippable adhesive.
    • Glossy surfaces should either be sanded or coated with professional vinyl prep.
    • Do not install wall covering unless the temperature in the working and storage areas are at least 55°F.
    • Be careful not to crease or bend material when handling.
    • It is suggested that a pencil be used to mark vinyl or wall. Anything else might bleed through the primer.
    • Walls should be checked with a suitable “moisture meter.” Moisture content should not exceed 4%. Remove any substrate mildew with a chlorine bleach solution, rinse, and allow to dry before installing. Wash greasy walls with an ammonia solution, rinse, and allow to dry before installing.
    • Drywall should be cured for at least 30 days before applying the primer, adhesive and wallcovering.

    Primer Instructions:

    Step 1: A high quality acrylic primer and or “size” must be used to achieve the best product performance. On new walls, drywall joints should be taped, bedded, and sanded smooth. Our Acrylic Primer can be tinted up to 2 match the wall. For all applications, prepare the surface for priming by pulling out nails or screws and spackling any holes or nicks.

    Step 2: After the spackling has cured, sand the surface by hand with a medium to fine grit sandpaper to make sure it is as smooth and level as possible.

    Step 3: Use a measuring tape, a level, and painter’s tape to section off exactly where you’ll be painting the primer and installing the Opti-Rite® Material. If you are performing an entire wall covering, refer to the Full Wall Covering Adhesive Installation Instruction Guide.

    Step 4: Ensure that the Acrylic Primer is well-shaken before painting onto the substrate with a clean paint roller in an even and generous coat. You must wait until the primer is fully dried before moving on to the Adhesive Process. Refer to your Primer’s Manufacturer from curing times. Our white Acrylic Primer takes 2 hours to dry.

    Installation and Adhesive Instructions:

    Step 1: Unroll your Opti-Rite® Material and fit it to the primed and dried section of the wall using a measuring tape and an X-acto knife or scissors.

    Step 2: Apply a uniform coat of heavy duty clay based adhesive to the primed and dried wall where the Opti-Rite® Material will be installed. Press the material to the coated substrate making sure it is perfectly level and plumb.

    Step 3: Use a flexible wallpaper smoothing tool, or squeegee wrapped in a fiber cloth to squeeze out air bubbles or extra adhesive from the center to edges of the material. If applied unevenly, pull it off and reapply before the adhesive dries.

    Step 4: If needed, trim the Opti-Rite® material with a single edged razor, such as an X-acto knife. Ensure there is enough adhesive to properly bond the edges to the wall.

    Step 5: Be sure to remove all excess adhesive immediately using a sponge and a warm mild soap solution. Do not use abrasive cleaners. Rinse thoroughly with water and dry with a clean towel. If the adhesive dries on the Opti-Rite® material writing surface, use a professional vinyl cleaner or wallpaper remover.

    Step 6: To prepare the Opti-Rite® material surface for use, gently wash it with a solution of 50/50% water/alcohol. Erasability will be affected if this step is not followed.

    We Also Recommend